What is the Argus Safety Database?

The Argus safety database is a key part of the Argus Safety 3.0.1 pharmacovigilance software system. In a nutshell, pharmacovigilance is defined as the monitoring of any possible adverse effects of both herbal remedies and synthetic drugs as they are used.

The digital database is used to help companies ensure compliance with global regulations regarding pharmacovigilance and related activities. As a comprehensive pharmaceutical software system, it supports pharmacovigilance business processes that take place in both the pre- and post-marketing phases.

The Argus database is hosted in a data center that is ISO-9001-certified, and operates according to the security standards promulgated by FDA guidelines. By managing this data center, a pharmaceutical firm or laboratory may obtain maximum physical data security as well as access to effective data backup and recovery procedures whenever these services are needed.

ACCOVION, the full-service contract research organization that offers pharmacovigilance as a core service, has configured the Argus database with customized and validated rules to expedite safety reporting. This setup enables generated safety reports to be sent to regulatory investigators and central ethics committees.

The system covers a wide range of the most commonly used forms, including the American FDA MedWatch 3500A form for drugs, the VAERS form for vaccines, the CIOMS-I form, and many others utilized in European countries.

The standard setup in use by the Argus safety database system includes coding with current World Health Organization and MedDRA data dictionaries, as well as older versions of these dictionaries and many others to meet user requirements.

Posted in general | Comments Off on What is the Argus Safety Database?

Determining the Best Type of Fastener to Use For Outdoor Furniture Construction

If you want to learn about selecting hardware for your next outdoor furniture project, then you'll want to read this article. Specifically, I'll be telling you about what type of hardware will perform best, why the type of metal used for fasteners and the finish used are important considerations, and how properly protecting or limiting exposure of your furniture to wet and winter conditions can increase Life span. After you're done with this article you will understand that the best choice of hardware for your outdoor furniture project is dependent on furniture style, material used for construction, selected location for the furniture and budget.

Selecting proper hardware for your furniture will help ensure a long life span, as well as improve the overall appearance of your furniture. Part of the problem is knowing what hardware to select when there are so many options available at the hardware store. The typical Lowes or Home Depot carries a huge selection of stainless steel, hot dipped galvanized, bright galvanized, plain steel, coated steel and brass bolts, nuts, washers and screws. Each type of fastener is suitable for certain applications, but not all are ideal for outdoor furniture applications.

In fact, choosing the wrong fasteners can greatly shorten the lifespan of your furniture, contribute to rot of wood furniture, cause unsightly staining, and even make your furniture unsafe to use.

One thing that needs to be noted right up front is, do not ever use unprotected steel fasteners for outdoor furniture, they will rust very quickly, and the steel will react with the tannic acid in the wood causing streaks and staining. The tannic acid actually speeds up the corrosion of the fasteners. Have you ever seen a wooden fence with black streaks running down the boards from the nails? This fence was installed with the wrong type of fasteners. The same thing will happen to your furniture. Even worse, as the fasteners rust, they will speed up the decay process of the wood around the rusted fasteners, ruining your furniture and making it potentially unsafe to use.

Hot Dipped Galvanized

Screws and bolts treated by hot dipped galvanizing are specifically designed for use outdoors. Electroplated galvanized or bright galvanized fasteners will very well not hold up as well as the hot dipped galvanized hardware. Zinc is used as a coating in both methods, and acts as a barrier against the elements and the tannic acids in the wood.

I strongly recommend only using screws or bolts in the construction of outdoor furniture, however. The galvanized finish on nails, either electroplated or hot dipped, can easily become damaged while hammering them in, exposing the nail head to the elements and allowing them to begin rusting quickly.

Adequate care must be taken when installing galvanized screws. Drill pilot holes in hardwoods, and be sure to use a bit that is not worn and intolerable to skipping in the screw head. For whatever reason, the galvanized screws seem to not be as well tempered as other steel fasteners, and are more likely to either snap off or have the heads strip out while installing them. Due to the permission required for the hot dipped coating, galvanized bolts do not have as tight of tolerance on the threads, and are more likely to strip if over tightened.

Hot dipped galvanized fasteners are a fine choice for many outdoor furniture applications, including Adirondack Chairs, but are not the best choice for use in woods, such as teak.

Stainless steel

Stainless steel is the best choice for use in woods with higher levels of tannic acid, such as teak. Stainless steel is an alloy or blend of steel, nickel and chrome. The ratio of the other metals with the steel determine the weather and corrosion resistance of stainless steel. Because the steel is mixed with other softer metals, the stainless steel is not as strong, so predrilling of screw holes is highly recommended in all applications, and essential in hardwoods such as teak and mahogany. The added corrosion resistance more than outweighs any shortcomings that the metal may have, especially in outdoor furniture applications.

While stainless steel fasteners are the most rust resistant, they are also the most expensive of the options we are discussing. However, using stainless steel fasteners will add years of life to your furniture. In the respect, they are an investment that will pay out for years to come.

Brass

I have seen brass used in some commercially produced outdoor furniture, but do not recommend it. While brass does not form red rust, and is well suited for many wet applications such as toilets and sinks, it does tarnish and corrode. It is also very susceptible to the tannic acids in wood, which will cause it to fail more quickly. Brass screws in particular Do not have sufficient strength for outdoor furniture applications.

Outdoor or deck screws

In the past several years a number of manufacturers have introduced outdoor fastening products specifically marketed for deck building. These will typically be green, gray, tan or brown. These screws are either ceramic or plastic coated to delay the metal reacting with the wood acids. The specific coating methods are proprietary to each manufacturer, and can be a combination of electroplated galvanizing and plastic, or a baked on ceramic.

I have used these fasteners in furniture applications and they perform just fine. Unfortunately, I have not come across bolts with this type of finish. The brand of screw I used was Deck Mate, and they were available in tan and brown, so that the color can be selected to better match the wood being used. These screws are ceramic covered, and the manufacturer provided a coated bit for installation, which was designed to not damage the ceramic coating at the screw head. If you choose this type of fastener, be sure to compare the cost with stainless steel, as the price will vary. If the stainless steel is reasonably comparable in cost, it would be the recommended fastener.

Always be sure to read the manufacturers specifications on the box to be sure that the screws are suitable for your application.

Other Considerations

If you are building furniture that will be located on a covered porch or patio where it will be protected from the elements, the concern will be the interaction between the wood and the fasteners, much more so than the weather. Furniture that will be exposed to the elements all year, such as a garden bench, or an adirondack chair in the corner of your garden, will have to be constructed with much more care and concern to ensure that they hold up more than just one or Two winters.

Additional considerations must be made beyond just the choice of what type of fastener to use, though this is very important. For example, fasteners should not be located where water where collect and sit on the fasteners for an extended period of time. The screws that attach the seat slats to an Adirondack chair are a prime example- typically these screws will be countersunk below the surface of the wood. This will allow water to collect in the screw holes, shortening the life span of all but stainless steel fasteners, and prolonging the exposure of the wood to water, which will increase the rate of decay. In applications where the furniture will be exposed to the elements year round the screw heads should be driven flush with the surface of the surrounding wood.

Construction and design of the furniture are also important considerations. Are the horizontal surfaces of the furniture constructed in such a way that will allow them to shed water, rather than collect it? Think of a picnic table with a slatted or board top. The gaps between the boards allow water a way to run off the top and not pool up.

Conclusion

Stainless steel is usually the best choice for outdoor furniture applications, although the cost may be prohibitive for some. There are other less expensive fastener options available that will perform acceptably. Do not use unprotected steel fasteners for outdoor furniture applications under any circumstances. Know where and how you intend to use your furniture and design it for the conditions it will be subjected to.

Posted in general | Comments Off on Determining the Best Type of Fastener to Use For Outdoor Furniture Construction

The Advantages of Working With a Software Boutique Company

First of all, a boutique is a small shop where clients can find dedicated merchandise and unique items, or products which are produced in small quantities. The advantage of entering in such a shop, compared to big supermarkets, is that here you’ll also find staff ready to assist you and to give you guidance step by step. Indeed, one may say that a boutique charges higher prices, also in comparison to chain stores, which is definitely true. However, once you bought something from a boutique you’ll have the feeling that you own a unique item, which will differentiate you from the rest, and isn’t this what we all want – to be unique?

Software boutiques are a new way of defining petite software companies which are focused on a certain niche, and which are able to offer specialized support to their customers. Even more, such a firm is able to offer a unique product, tailored on the client’s needs and requirements. But, let’s see what advantages does a customer have when collaborating with a software boutique company:

Tailored product

A software boutique takes the client’s specifications and transforms them into a customized piece of software. Practically, if you are not satisfied by the mass-produced software programs which you can find, then a boutique company will tailor a product according to each and everyone of your requirements. The outcome will be a software product which is able to fit perfectly your company’s needs.

Niche focus

Generally, a boutique company is focused on a certain niche, for example developing applications and software products using Microsoft technologies. The advantage of having such a partner, is that you’ll have the confidence that he has the knowledge and proven experience to offer you the best advices regarding that specific area, and that he’s always updated with the latest technologies.

Crystal clear communication and dedicated support

Having a smaller amount of projects, a boutique software company can offer its clients dedicated support, according to every client’s need through a direct communication flow. This means that the information won’t need to travel through several departments until it reaches you, so that you’ll always be updated with the status and the quality of the work.

A good communication, not only that can save time, but also can make the development process more efficient. For example if you want a specific functionality for your application, collaborating with a boutique firm, you’ll able to keep track of the development process and promptly interfere in the development process if the work isn’t going in the desired direction, or if you want to change the approach. Also, fewer the clients, better the support. Practically, a software boutique will offer you their entire attention and expertise, whenever this is required.

Every client is important

For a boutique company every client is important, and because they can’t afford to lose a client, they can’t really afford to do a bad job. Every development project is treated with care, and you’ll know for sure that your project will be handled by the best men.

Posted in general | Comments Off on The Advantages of Working With a Software Boutique Company

Advantages of Antispyware Programs

Much like the antivirus programs, now a days anti spyware programs also is a must if you are browsing the net. Most of the antivirus programs provide a good job by taking care of the computer viruses. However, many of them fail to detect the spyware which gets installed onto the PC when connected to the internet. This is where Anti spyware programs comes to help. They do a good job by protecting our computers by identifying the spyware and promptly remove them.

There are so many antispyware programs are available in the market. Both in the Online as well as near to your computer retail showroom. However, you have to ensure that you buy a good Anti spyware program which fulfills the requirements what it promises. Also, make sure to check that the software works on your Operating System. Most of them work on Windows Operating system; however, there is no harm in double checking the same.

Some of the characteristics of a good antispyware program is as below.

Real time scanning

Real time scanning is the heart of these type of programs. The program once installed should reside on your system tray and should be able to do a real time scan in the background. This way it should be able to identify all kinds of threats like Adware, spyware, Trojans and the harmful key loggers.

Automatic Updates

There is no point in having an Antispyware software program which does not update the spyware definitions automatically and at periodic intervals.

Customer Support

Most of the time you will not be require to call up their helpdesk as the software will work automatically provided if the operating system is compatible and all the installation prerequisites are met. However, if you run across any installation problems or some kind of bugs customer service comes in handy.

Posted in general | Comments Off on Advantages of Antispyware Programs

The Role of Technology in Education

In the current age we live in, technology has become an important component. Every day there is some new gadget or software that makes lives easier and improves on the technology and software that already exists. Making lives easier is not, however, the only role technology plays in our lives.

Technology is playing an increasing role in education. As technology advances, it is used to benefit students of all ages in the learning process.

Technology used in the classroom helps students adsorb the material. For example, since some people are visual learners, projection screens linked to computers can allow students to see their notes instead of simply listening to a teacher deliver a lecture.

Software can be used to supplement class curriculum. The programs provide study questions, activities, and even tests and quizzes for a class that can help students continue learning outside the classroom.

Technology has also become part of many curriculums, even outside of computer and technology classes. Students use computers to create presentations and use the Internet to research topics for papers and essays.

Students also learn to use the technology available to them in computer and tech classes. This ensures that after graduation they will be able to use the technology in a work setting, which may put them ahead of someone who did not have access to a particular technology or software in their own school setting.

As technology advances, students have better access to educational opportunities like these. When something new and "better" is disclosed, the "older" technology becomes more affordable, allowing it to be used in educational settings, even when schools are on a tight budget.

Technology has also advanced to help children even before they've started school. Educational video games and systems for young children helps them prepare for school and in some cases get a head start on their education.

There are people who may say children are "spoiled" by technology. Instead of being able to add a long column of numbers in their heads, for example, they turn to a calculator. Regardless of these arguments, technology is an important part of today's society. By incorporating it into the classroom, students will be better equipped to transition from the classroom to the work place.

Posted in general | Comments Off on The Role of Technology in Education

Wide Area Network (WAN)

Types and Characteristics of WANs

What is a WAN?

There are two prevailing definitions of a Wide Area Network (WAN). The book definition of a WAN is a network that spans large geographical locations, typically to interconnect multiple Local Area Networks (LANs). The practical definition of a WAN is a network that traverses a public network or commercial carrier, using one of several WAN technologies

What are its Main Components?

The main components for a WAN are routers, switches and modems. These components are described below in the hardware section.

CPE – Devices on the subscriber contracts are called customer premises equipment (CPE).
The subscriber owns the CPE or leases the CPE from the service provider. A copper or fiber cable connects the CPE to the service provider's nearest exchange or central office. This cabling is often called the local loop, or "last-mile".

DTE / DCE – Devices that put data on the local loop are called data circuit-terminating equipment, or data communications equipment (DCE). The customer devices that pass the data to the DCE are called data terminal equipment (DTE). The DCE primarily provides an interface for the DTE into the communication link on the WAN cloud.

Hardware

In a WAN you will need various types of hardware components for it to function. The typical items of hardware that you will need in a WAN are:

Router – An electronic device that connects a local area network (LAN) to a wide area network (WAN) and handles the task of routing messages between the two networks. Operates at layer 3, and makes decisions using IP addresses.

Switch – A switch is a network device that selects a path or circuit for sending a unit of data to its next destination. Operates at layer 2, and uses MAC addresses to send data to correct destination.

Modem – Short for modulator / demodulator, a modem that enables a computer to communicate with other computers over telephone lines. Operates at layer 1, where signals are converted from digital to analogue and vice versa for transmission and receiving.

Wan Standards

WANs operate within the OSI model using layer 1 and layer 2 levels. The data link layer and the physical layer. The physical layer protocols describe how to provide electrical, mechanical and functional connections to the services provided by the ISP. The data link layer defines how data is encapsulated for transmission to remote sites.

Encapsulation

Encapsulation is the wrapping of data in a particular protocol header. Remember that WANs operate at the physical layer and the data link layer of the osi model and that higher layer protocols such as IP are encapsulated when sent across the WAN link. Serial interfaces support a wide range of WAN encapsulation types, which must be manually specified. These types include SDLC, PPP, Frame delay etc. Regardless of WAN encapsulation used it must be identical on both sides of the point to point link.

Packet and Circuit Switching

Circuit switching and packet switching are both used in high-capacity networks.
The majority of switched networks today get data across the network
Through packet switching.

Circuit-switching is more reliable than packet-switching. Circuit switching is old and expensive, packet switching is more modern.

General Routing Issues

What is a Routing Protocol?

A routing protocol is a protocol that specifies how routers communicate and exchange information on a network. Each router has prior knowledge of its immediate neighbors and knows the structure of the network topology. The routers know this because the routing protocol shares this information.

Protocol

RIP (Routing Information Protocol) was one of the most commonly used protocols on internal networks. Routers use RIP to dynamically adapt changes to the network connections and communicate information about which networks routers can reach and the distance between them. RIP is sometimes said to stand for Rest in Pieces in reference to the reputation that RIP has for breaking unexpectedly and rendering a network unable to function.

Routing Algorithms

Distance Vector

This type of routing protocol requires that each router simply inform its neighbors of its routing table. The distance vector protocol is also known as the bellman-ford algorithm.

Link State

This type of routing protocol requires that each router maintain a partial map of the network. The link state algorithm is also know as Dijkstra's algorithm.

IGRP

IGRP is a type of distance vector routing protocol invented by cisco used to exchange routing data in a autonomous system. Distance vector protocols measure distances and compare routes. Routers that use distance vector must send all or a portion of their routing table in a routing update message at regular intervals to each neighbor router.

Addressing and Routing

What does routing mean?

Routing is the process of deciding how to move packets from one network to another.
The directions also known as routes can be learned by a router using a routing protocol then the information is passed from router to router along the route of the destination.

IP Address's

Every machine connected to the internet is assigned an IP address. An example of an IP address would be 192.168.0.1. IP addresses are displayed in decimal format to make it easier for humans to understand but computers communicate in binary form. The four numbers that separate an IP address are called Octets. Each position consists of eight bits. When added to together you get 32 ​​bit address. The purpose of each octet in an IP address is to create classes of IP addresses that can be assigned within a network. There are three main classes that we deal with Class A, B and C. The octets of an IP address are split into two parts Network and Host. In a class A address the first octet is the network portion, this determinates which network the computer belongs to, the last octets of the address are the hosts that belong to the network.

Sub netting

Sub netting allows you to create multiple networks within a class A, B or C address. The subnet address is the address used by your LAN. In a Class C network address you would have a subnet mask of 255.255.255.0. A subnet mask identifies which portion is network and which is host. For example 192.168.6.15 the first octet three octets are the Network address and the last octet being the host (Workstation). It is important to subnet a network because gateways need to forward packets to other LANS. By giving each NIC on the gateway an IP address and a Subnet mask it allows the gateways to route packets from LAN to LAN. Once the packet arrives at its destination, the gateway then uses the bits of the subnet portion of the IP address to decide which LAN to send the packets.

Circuit Switched Leased Lines

A circuit switched network is one that establishes a dedicated circuit (or channel) between nodes and terminals before the users may communicate. Here are some terminologies associated with a Circuit switched network.

Frame relay is a telecommunication service designed for cost-efficient data transmission between local area networks (LANs)

Basic rate interference is a service used by small business for internet connectivity. An ISDN BRI provides two 64 Kbps digital channels to the user.
Primary rate interface (PRI) is a telecommunications standard for carrying voice and data transmissions between two locations
All data and voice channels are ISDN and operate at 64kbit / s

Packet Switching

Http://www.raduniversity.com/networks/2004/PacketSwitching/main.htm – _Toc80455261

Packet switching refers to protocols in which messages are broken up into small packets before they are sent. Each packet is then transmitted over the Internet. At the destination the packages are reassembled into the original message. Packet switching main difference from Circuit Switching is that that the communication lines are not dedicated to passing messages from the source to the destination. In Packet Switching, different messages can use the same network resources within the same time period.

Http://en.wikipedia.org/wiki/Asynchronous_Transfer_Mode

Asynchronous Transfer Mode (ATM) is a cell relay, packet switching network and protocolwhich encodes data into small fixed-sized cells.

ISDN is used to carry voice, data, video and images across a telephone network. ISDN stands for integrated services Digital Network. Isdn also provides users with a 128kbps bandwidth. This is done through frame relay. Frame relay complements and provides a service between ISDN, which offers bandwidth at 128 Kbps and Asynchronous Transfer Mode which operates in somewhat similar fashion to frame relay but at speeds from 155.520 Mbps or 622.080 Mbps. Frame relay is based on the older X.25 packet switching technology and is used to transmit analogue signals such as telephone conversations.

PSDN stands for packet switched data network and is a data communication network. Packet switched networks do not establish a physical communication signal like the public telephone circuit (circuit switched network) Packets are sent on a fixed length basis and assigned with a source and a destination address. The packages then explicitly on the routers to read the address and route the packets through the network.

Mobile and Broadband Services

Digital Subscriber Line (DSL) is mainly used to bring high bandwidth connections to homes and small business's over a copper wire telephone line. This is can only be achieved if you stay within the range of the telephone exchange. DSL offers download rates of up to 6mbps allowing continuous transmission of video, audio and 3D effects. DSL is set to replace ISDN and compete with the cable modem in providing multimedia to homes. DSL works by connecting your telephone line to the telephone office over copper wires that are twisted together.

Asymmetric Digital Subscribers Line is most commonly used for home users. It provides a high download speed but a lower upload speed. Using ADSL, up to 6.1 megabits per second of data can be sent downstream and up to 640 Kbps upstream.

Http://en.wikipedia.org/wiki/Symmetric_Digital_Subscriber_Line

Symmetric Digital Subscriber Line is a digital subcriber line which runs over one pair of copper wires. The main difference between ADSL and SDSL is the difference in upload and download speeds. SDSL allows the same upstream data rate and downstream data rate as ADSL upstream can be very slow.

[Http://searchnetworking.techtarget.com/sDefinition/0],,sid7_gci558545,00.html

HDSL High bit-rate Digital Subscriber Line, one of the earliest forms of DSL, is used for wideband digital transmission within a corporate site and between the telephone company and a customer. The main characteristic of HDSL is that that provides equal bandwidth in both directions.

IDSL is a system in which data is transmitted at 128 Kbps on a regular copper telephone line from a user to a destination using digital transmission.

The Local Loop enables operators to connect directly to the consumer via copper local loops and then add their own equipment to offer broadband and other services. This process involves operators accessing local exchange buildings to connect to a network of copper lines which connect them to homes and businesses. BT is an Example of a Local Exchange. The local loop connecting the telephone exchange to most subscribers is capable of carrying frequencies well beyond the 3.4 kHz upper limit.

Benefits of using DSL

DSL can provide a virtual instantaneous transmission of voice, data and video over ordinary copper phone lines. A DSL connection can eliminate delays while waiting to download information and graphics from the Internet. It provides users with a cost effective high speed Internet connection. Another benefit is that a DSL connection is always on-line (like a LAN connection) with no waiting time for dialing or connecting.

There are now more than 10 million broadband connections in the UK. By December 2005 there were 9.792 million broadband connections in the UK and the average broadband take up rate during the three months to December was more than 70,000 per week.

Posted in general | Comments Off on Wide Area Network (WAN)

Jingle Maker – Making Jingles With Desktop Music Maker Software

Looking to get into the jingle maker industry? It’s not exactly an easy field to break into but it is worth the trouble if you are ready to put forth the necessary time and effort to make it. If you are not already a professional musician then you will need a way to produce your jingles. We recommend desktop music maker software for this purpose. The rest of this article will cover the top three things you should look for when it comes to a desktop music making application for making jingles.

Feature #1 – Professional Music Production

If you are approaching the jingle making from the perspective of making money then you need to make sure your entire production is created in the manner that lends itself for commercial adaptation. This is essential if you expect your jingles to be used as radio jingles, commercial jingles or advertising jingles. For starters that means making sure you are able to create music output that is a minimum of 44,1 khz.wav files. You will also want to be able to create real bars of music versus samples or loops. This is a benefit of using music making software because it will make sure your music is created to be communicated to other musicians for playback.

Feature #2 – Variety Of Features

When you are just get started you will want something that allows you to take the melodies in your head and get them into music as quick as possible. Yet at the same time you don’t want to have to learn another application as your own skill set grows. This is why it makes sense to choose software that is usable as a beginner and expert alike. It should come with a number of presets that you can expand upon and purchase as your own abilities grow.

Feature #3 – Complete With Sound Generator

You never know where your jingle making skills will take you so you should also have access to making sound effects. It’s not necessarily a must have feature but if you have the choice then make it for software that does include this. You just never know when you may need this as a jingle maker.

We have briefly looked at some of the features you may want to look for when searching for music maker software for your jingle production exercise. The needed feature set should include professional music production capabilities, a variety of features and a sound generator. Of course these are just a small sample of features that you will find when looking for music maker software. But having the right tools just means you will be that much closer to creating the next set of catchy jingles.

Posted in general | Comments Off on Jingle Maker – Making Jingles With Desktop Music Maker Software

Creative Marketing Ideas For Hardware Stores

With large nationwide chains that dominate the market, small hardware stores sometimes have a difficult time being competitive. The key is to find a unique selling proposition for your business and to capitalize on it so customers see the value in choosing you over one of the larger stores. Here are some great ways to make your business stand out.

  1. Giveaways -When your store first opens (or even if you're just looking for an extra push), offer small giveaways to your customers with their purchase. These will be tools or products they can use that are branded with your store's information-hammers, tape measures, levels, etc. When a customer is using this product and runs out of something or determinates the need to visit a hardware store, they'll see your information and immediately head your way!
  2. In-Store Classes -Hardware stores often form a bit of a culture and social atmosphere, so find ways to play this up. One great choice is to sponsor training classes and educational seminars in your store. Work with your vendors to provide information that your customers will find valuable. Even your employees can instruct these classes-anything from minor home renovation products to full-scale remodeling. List the classes you're offering that month above your cash registers with a large, visible vinyl banner which clearly-informs customers of their opportunities to expand their skills.
  3. Charity Donations -Offer your products to charity groups and organizations in-town which build or repair homes for the less-fortunate. This is great PR for your business, it makes you look more-reliable, and in return you're often able to advertise at the home-site using a banner or yard sign. When customers see that you're giving back to your community, they are more-inclined to shop with you.
  4. Ladies Night -Most hardware stores predominately-market toward men. While the majority of your customers are probably male, do not neglect the ladies. Host a "Ladies Night" at your store that offers your educational classes and even a special discount on purchases made by women. Use removable window clings to give your store a slight feminine touch. There's a huge potential market here that is somewhat-untapped, and with the right approach, female customers can dramatically affect your business.
  5. Personal Shoppers -Some customers complain that hardware or home improvement stores are overwhelming. Counter this objection by providing customers with a personal shopping service. Your employees already help customers find products daily anyway, but creating a formal program provides a revenue opportunity. Customers can have one of your employees guide them around the store and help them find exactly what they need for their project, or for even-more convenience, your employee can preselect the products they need so that when the customer arrives, all they have to Do is check out.
Posted in general | Comments Off on Creative Marketing Ideas For Hardware Stores

How Useful is CAD Software to Engineers and Architects?

The emergence of advanced technology has made people today dependent on machines. Using computers and software, for example, is a very common illustration of this. Computer experts are coming up with more and more software to make more and more jobs easier.

A more specific illustration of this can be found in the modern approach towards engineering and architecture. These days, professionals in these fields use CAD computer software which is a program that allows them to create designs faster, easier and with more accurate measurements. Aside from the convenience that CAD software brings, it also helps put architects and engineers ahead of their competitors. CAD, which can render designs that are two-dimensional or three dimensional, stands for Computer Aided Design and has been in use since 1982.

So how does CAD computer software work? And what does it do exactly to help engineers and architects? The program is actually multifaceted in the sense that there are many ways it can help. To make CAD work will require, however, a careful study of its features and the many ways it can be used. It is rather a complex yet flexible and highly functional program.

This article will not be enough to discuss the various ways that CAD works but pinpointing its advantages could give some very good ideas. One great advantage of CAD computer software is its easy-to-use tools in the creation and alteration of designs. Obviously, this is so much better than the old fashioned way of using a pencil and eraser directly on paper. This method of designing is obviously so much easier and engineers and architects simply have more time to finish other tasks. In other words, high productivity is going to be the main end result of using CAD.

Before the design is actually printed on paper, CAD also allows both the design professional and the client to preview what has been finished so far. Any alterations can be made simply by manipulating the drawing through the use of the software. With CAD, it is so much easier to spot errors because the designs can be rendered exactly as they would be in reality. Hence, modifications can be done even before printing, thus, allowing one to save.

With the tough competition that everyone has to face these days, it is wise to take advantage of new technologies that can help put them ahead in the race. While traditional methods hold a significant part in the history of design, advanced tools such as CAD software should only be welcomed as man’s way of furthering development in a field of expertise that he himself has created long ago.

Posted in general | Comments Off on How Useful is CAD Software to Engineers and Architects?

Examples Of Spyware And What They Are

Spyware is a general term used to describe software that performs certain behaviors such as advertising, collecting personal information, or changing the configuration of your computer, generally without appropriately obtaining your consent first.

Spyware is often associated with software that displays advertisements (called adware) or software that tracks personal or sensitive information.

That does not mean all software that provides ads or tracks your online activities is bad. For example, you might sign up for a free music service, but you “pay” for the service by agreeing to receive targeted ads. If you understand the terms and agree to them, you may have decided that it is a fair tradeoff. You might also agree to let the company track your online activities to determine which ads to show you.

Other kinds of Spyware make changes to your computer that can be annoying and can cause your computer slow down or crash.

These programs can change your Web browsers home page or search page, or add additional components to your browser you don’t need or want. These programs also make it very difficult for you to change your settings back to the way you originally had them.

The key in all cases is whether or not you (or someone who uses your computer) understand what the software will do and have agreed to install the software on your computer.

There are a number of ways Spyware or other unwanted software can get on your computer. A common trick is to covertly install the software during the installation of other software you want such as a music or video file sharing program.

Any software that covertly gathers user information through the user’s Internet connection without his or her knowledge, usually for advertising purposes. Spyware applications are typically bundled as a hidden component of freeware or shareware programs that can be downloaded from the Internet; however, it should be noted that the majority of shareware and freeware applications do not come with SpyWare. Once installed, the Spyware monitors user activity on the Internet and transmits that information in the background to someone else. Spyware can also gather information about e-mail addresses and even passwords and credit card numbers

Aside from the questions of ethics and privacy, SpyWare steals from the user by using the computer’s memory resources and also by eating bandwidth as it sends information back to the spy ware’s home base via the user’s Internet connection. Because SpyWare is using memory and system resources, the applications running in the background can lead to system crashes or general system instability.

Because SpyWare exists as independent executable programs, they have the ability to monitor keystrokes, scan files on the hard drive, snoop other applications, such as chat programs or word processors, install other SpyWare programs, read cookies, change the default home page on the Web browser, consistently relaying this information back to the SpyWare author who will either use it for advertising/marketing purposes or sell the information to another party.

Licensing agreements that accompany software downloads sometimes warn the user that a SpyWare program will be installed along with the requested software, but the licensing agreements may not always be read completely because the notice of a SpyWare installation is often couched in obtuse, hard-to-read legal disclaimers.

Examples of SpyWare

These common SpyWare programs illustrate the diversity of behaviors found in these attacks. Note that as with computer viruses, researchers give names to SpyWare programs which may not be used by their creators. Programs may be grouped into “families” based not on shared program code, but on common behaviors, or by “following the money” of apparent financial or business connections. For instance, a number of the SpyWare programs distributed by Claria are collectively known as “Gator”. Likewise, programs which are frequently installed together may be described as parts of the same SpyWare package, even if they function separately.

o CoolWebSearch, a group of programs, takes advantage of Internet Explorer vulnerabilities. The package directs traffic to advertisements on Web sites including coolwebsearch.com. It displays pop-up ads, rewrites search engine results, and alters the infected computer’s hosts file to direct DNS lookups to these sites.

o Internet Optimizer, also known as DyFuCa, redirects Internet Explorer error pages to advertising. When users follow a broken link or enter an erroneous URL, they see a page of advertisements. However, because password-protected Web sites (HTTP Basic authentication) use the same mechanism as HTTP errors, Internet Optimizer makes it impossible for the user to access password-protected sites.

o Zango (formerly 180 Solutions) transmits detailed information to advertisers about the Web sites which users visit. It also alters HTTP requests for affiliate advertisements linked from a Web site, so that the advertisements make unearned profit for the 180 Solutions Company. It opens pop-up ads that cover over the Web sites of competing companies.

o HuntBar, aka WinTools or Adware,WebSearch was installed by an ActiveX drive-by download at affiliate Web sites, or by advertisements displayed by other SpyWare programs-an example of how SpyWare can install more SpyWare. These programs add toolbars to IE, track aggregate browsing behavior, redirect affiliate references, and display advertisements.

oZlob Trojan or just Zlob, Downloads itself to your computer via ActiveX codec and reports information back to Control Server. Some information can be as your search history, the Websites you visited, and even Key Strokes.

Posted in general | Comments Off on Examples Of Spyware And What They Are